• ClaRa
  • A User Guide
  • Basic Concepts of Modelling
  • Basics
    • ControlVolumes
      • FluidVolumes
      • Fundamentals
        • ChemicalReactions
        • Geometry
        • HeatTransport
          • Gas HT
          • Generic HT
            • Adiabat L2
            • Adiabat L3
            • Adiabat L4
            • CharLine L2
            • CharLine L4
            • Constant L2
            • Constant L3
            • Constant L4
            • Heat Transfer L2
            • IdealHeatTransfer L2
            • IdealHeatTransfer L3
            • IdealHeatTransfer L4
            • NominalPoint L4
          • VLE HT
        • PressureLoss
        • SpatialDistributionAspects
      • GasVolumes
      • SolidVolumes
    • Functions
    • Interfaces
    • Media
    • Records
  • Components
  • Examples
  • SimCenter
  • StaticCycles
  • SubSystems
  • Visualisation
• ZIM DocumentationTemplate

Adiabat L4

Created Donnerstag 15 Oktober 2015

Adiabatic component - no heat is transferred

1. Purpose of Model

An ideally insulated component

2. Physical Insight

This replaceable model is compatible to models of level of detail L4 according to Brunnemann et al. [1].

3. Limits of Validity

- none

4. Interfaces

The model communicates via outer models and records. Thus its expects to have:

• an outer model named geo as defined Fundamentals:Geometry:GenericGeometry
• an outer record named iCom as defined in Basics:Records:IComBase L2

It has a Basics:Interfaces:HeatPort a heat that shall be connected with the applying component model.

5. Nomenclature

a table referencing the nomenclature in the source code, the descriptions of variables and the "human-readable"

6. Governing Equations

The heat flow rate is set to zero, i.e.

7. Remarks for Usage

8. Validation

9. References

[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulationof Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012

10. Authorship and Copyright Statement for original (initial) Contribution

Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.

11. Version History

• 2012 - v 0.1 - initial implementation - Friedrich Gottelt, XRG Simulation

---

Backlinks: ClaRa:Components:HeatExchangers:FlatTubeFinnedHEXvle2gas L4 ClaRa:Components:HeatExchangers:RegenerativeAirPreheaterSecAir L4 ClaRa:Components:HeatExchangers:RegenerativeAirPreheater L4 ClaRa:Basics:ControlVolumes:GasVolumes:VolumeGas L4 ClaRa:Components:VolumesValvesFittings:Pipes:PipeFlowGas L4 Simple